14mm vinyl-looped entrance mat

14mm vinyl-looped entrance mat

Specifications for searchings
Area of use: interior and exterior Placement: matwell and surface Thickness14 Customised Fire resistance clasification Level of transit: medium Degree of moisture absorption: low Degree of dirt retention: high Degree of durability: medium Degree of easiness to clean: high
 shopping centres, hospitals, airports and stations, etc...
 medium-sized company, supermarkets, office buildings, headquarters of public offices, etc...
 small business, apartment buildings
 private dwelling, small business


This vinyl-looped mat is a classic in its segment of the market. It is a 14mm-thick roll-up mat composed of looped PVC fibre, which forms a lattice that has a scraping effect on the sole of footwear. This in turn enables all the trapped dirt to pass through the mat, without it having to be shaken. Every so often it will suffice to simply remove the mat and dispose of the captured dirt accumulated in the matwell in which it is housed
It is suitable for both indoor and outdoor use, and has been designed to be housed in a matwell ( embedded in the floor ). Furthermore, it does not require any special installation or adjustment
It can also be placed directly on the floor, in which case it would be supplied with a special, manually handcrafted ramp edge

Its characteristics are shown below

Optional customization

Corporate logos can also be reproduced on it using the following process:
1. The material is die-cut using a high-tech machine
2. Each piece is thermally welded by hand
3. Reinforcement material is placed on the backing


a ) You must check in advance whether total or partial reproduction is possible. In order to determine this, we must first see the logo you intend to reproduce
b ) It is not possible to reproduce very fine strokes due to the fact that the material the mat is made of is not continuous as it consists of fibres
c ) The only colours available for both the logo and the background are the ones which are available in the particular range. It is not possible to reproduce specific colours
d ) The lead time is 3-4 weeks

Ramp edge

In cases where the doormat is placed directly on the floor, confection of a ramp edge is highly recommended so that it bridges the uneven height between the floor and the top of the doormat, as well as giving it a much smarter appearance

The product without ramp edge can be seen below and the difference is notable



Formats and dimensions

Technical characteristics

 Composition  100% PVC
 Thickness  14mm  +/- 10%
 Weight  4200 grammes / m2  +/- 10%
 Thickness of the filament  1mm  +/- 5%
 Dimensional stability  +/- 2,5 %
 Estabilidad relativa al peso  +/- 2,5 %
 Resistencia a la abrasión  +/- 1 gr
 Fire resistance  self-extinguishing ( in accordance with ASTM D2859 )

Information for invitation to tender


This website uses its own and third-party cookies. By continuing to browse the site you are agreeing to accept our use of cookies. For more information see our cookies policy